Menu

    Mallcom - TM564

    • By Industry

    • By Hazard

    • By Protection

    Please rotate your device

    We don't support landscape mode yet. Please go back to portrait mode for the best experience.

    scroll up icon

    Hover to zoom

    Impact resistant mechanical glove, natural grain leather palm, breathable synthetic fabric back, flexible impact resistant design name “SIMUM” stitched on back for irreproachable performance, Velcro adjusted knitted cuff for snugly fitting.

    Key Features

    • Grain leather mechanical glove, Wing thumb pattern, Velcro adjusted knitted synthetic cuff
    • Provides good mechanical resistant and comfort
    • Chromium VI free leather according to EN 21420:2020
    • Hi vis fabric stitched on back of the finger tips for better visibility
    • Impact resistant patch ensures user safety from free falling objects or from other mechanical injuries to the back of the hand

    Design :

    • Mechanical gloves with leather palm & synthetic fabric back
    • Hi vis fabric stitched on back of the finger tips for better visibility

    Product Make :

    Industry / Job : Construction & Civil, Heavy Engineering, Manufacturing, Repairs & Maintenance, Mining & Metallurgy, Warehousing & Assembling, Logistics & Transportation

    Hazard / Risk : Impact, Cut, Puncture, Low Visibility

    How To Use

    • Limits to use: To be worn on the hand to avoid mechanical hazard (e.g. Abrasion, cut, Tear, Puncture, impact). This glove does not contain a substance known as being carcinogenic, neither toxic nor likely to cause allergies to the sensitive people.

    • Instructions for storage: Store in a cool, dry place; away from frost and light in their original packaging.

    • Instructions for cleaning: It is generally recommended that leather gloves be dry cleaned. Soap and water remove the natural oils present in the leather, causing them to stiffen and become brittle.

    Tests Conducted

    • Abrasion as per EN 388 is 2: Resistance to abrasion Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.

    • Cut as per EN 388 is 1: Blade cut resistance Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.

    • Tear as per EN 388 is 2: Tear resistances Based on the amount of force required to tear the sample.The protection factor is then indicated on a scale from 1 to 4.

    • Puncture as per EN 388 is 2: Puncture resistances Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

    • TDM blade cut resistant as per EN 388 is X: TDM blade cut resistant The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads.The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample ".

    • Impact test level as per EN 388 is P: Impact Test: In this test, gloves are cut, opened out flat, so that the area of impact protection can be tested independently, and secured over a domed anvil. The test area is impacted with a 2.5kg flat face striker from a sufficient height to provide impact energy of 5J. The peak force – detected by a load cell or sensor mounted beneath the anvil – is recorded.


    Products Used in Same Industry

    TM564 Impact Resistant Leather Gloves