Menu

    Mallcom - TECHO FL 30

    • By Industry

    • By Hazard

    • By Protection

    Please rotate your device

    We don't support landscape mode yet. Please go back to portrait mode for the best experience.

    scroll up icon

    Hover to zoom

    Heavy weight supported nitrile dipped gloves. A comfortable glove with excellent dexterity, enhanced grip particularly useful in slippery and oily environments.

    Key Features

    • Full nitrile coated on yellow fleecy cotton liner with gauntlet style.
    • Construction gives you excellent hand dexterity with blue rough finish.
    • Gauntlet size available either in 30 cm or in 40 cm.

    Design :

    • Blue coloured full nitrile coated .
    • Gauntlet style imparts different look and offers higher protection.
    • Rough finish ensures better abrasion resistance.
    • Cotton jersey lining offers more comfort.

    Product Make :

    Size:

    Industry / Job : Manufacturing, Material Handling, Heavy Engineering, Oil-Gas-Petrochemical, Chemical & Paint, Construction & Civil

    Hazard / Risk : Dust, Puncture, Cut, Dirt

    How To Use

    • Never leave to dry close to or on top of a heat source.
    • Not advised to use beyond 6 months of usage and stored in a cool and dry place.

    • Not advised to be used for more than 6 hours at a stretch.

    • Can be used to handle oil and non-hazardous chemicals.

    • Not advisable for the risk associated with moving machine parts\.

    • Advised to wash in cold water with mild detergent and can be tumble dried at low or no heat.

    Tests Conducted

    • Abrasion as per EN 388 is 4: Resistance to abrasion Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
    • Cut as per EN 388 is 1: Blade cut resistance Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
    • Tear as per EN 388 is 2: Tear resistances Based on the amount of force required to tear the sample.The protection factor is then indicated on a scale from 1 to 4.
    • Puncture as per EN 388 is 1: Puncture resistances Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.
    • Test E TDM blade cut resistant as per EN 388 is X (X means not tested): TDM blade cut resistant The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as force. The blade moves across the fabric.The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different load. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.
    • EN 374-2: Protection against Micro Organism Risks: The standard EN 374-2 specifies a test method for the penetration resistance of gloves protecting against chemical products and/or micro-organism, when the gloves resist penetration, they are tested according to this part of EN374-2, and they provide an effective barrier against microbiological risks.
    • EN 374-3: Protection against Chemical risks: The standard EN374-3 involves the determination of the resistance of the materials making up the gloves to permeation by non-gaseous chemical product which are potentially hazardous in case of continued contact. Emphasis is therefore placed on the fact that this does not take into account conditions which are likely to be encountered actual working conditions. It is therefore recommended to only use the test results, which have basically relative values, to compare the materials on the basis of the major categories of passage of time.

    Remarks

    • Nirtile provides usefulness in oily and slippery environment.
    • These gloves can be used effectively to resist chemical and abrasion hazard.

    Products Used in Same Industry

    TECHO FL 30 Cut & Sewn Nitrile Gloves