Menu

    Mallcom - T-MFCB

    • By Industry

    • By Hazard

    • By Protection

    Please rotate your device

    We don't support landscape mode yet. Please go back to portrait mode for the best experience.

    scroll up icon

    Hover to zoom

    240 GSM cotton Interlock cut and stitch medium coated nitrile glove with safety cuff, blue-colored coating with a smooth finish. Flexible Impact-resistant metacarpal guard; design name DICEROS glued on back.

    Key Features

    • Impact shielded cut & stitch nitrile glove.
    • Cotton interlock liner.
    • Flexible impact guard patch pasted on back.

    Design :

    • Metacarpal protector patch glued with glove liner for seamless performance.
    • Impact resistance capabilities complies with EN 388:2016 standard.
    • Customizable for printing other brand names on impact guard.
    • Customization impact guard color option as per adjacent surface.

    Product Make :

    Size:

    Industry / Job : Construction & Civil, Repairs & Maintenance, Mining & Metallurgy, Material Handling, Warehousing & Assembling

    Hazard / Risk : Cut, Heat, Impact, Slip

    How To Use

    • Limits to use: To be worn on the hand to avoid mechanical hazard (e.g. Abrasion, cut, Tear, Puncture, impact). This glove does not contain a substance known as being carcinogenic, neither toxic nor likely to cause allergies to the sensitive people.

    • Instructions for storage: Store in a cool, dry place; away from frost and light in their original packaging.

    • Instructions for cleaning: Use cold water 30 Degree C or less, wash with regular detergent, Tumble dry medium heat.

    Tests Conducted

    • Abrasion as per EN 388 is 4: Resistance to abrasion Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.

    • Cut as per EN 388 is 1: Blade cut resistance Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.

    • Tear as per EN 388 is 2: Tear resistance Based on the amount of force required to tear the sample.The protection factor is then indicated on a scale from 1 to 4.

    • Puncture as per EN 388 is 1: Puncture resistance Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

    • TDM blade cut resistant as per EN 388 is X: TDM blade cut resistant The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads.The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample ".

    • Impact test level as per EN 388 is P: Impact Test: In this test, gloves are cut, opened out flat, so that the area of impact protection can be tested independently, and secured over a domed anvil. The test area is impacted with a 2.5kg flat face striker from a sufficient height to provide impact energy of 5J. The peak force – detected by a load cell or sensor mounted beneath the anvil – is recorded.


    Products Used in Same Industry

    T-MFCB Impact Resistant Nitrile Gloves