Menu

    Mallcom - RS3TDL

    • By Industry

    • By Hazard

    • By Protection

    Please rotate your device

    We don't support landscape mode yet. Please go back to portrait mode for the best experience.

    scroll up icon

    Hover to zoom

    Impact shielded seamless cut resistant nitrile dipped gloves. A pair of comfortable gloves with excellent dexterity, enhanced grip.

    Key Features

    • Nitrile coated palm and finger on milange TUF TEC liner.
    • Construction gives you excellent hand dexterity with black sandy finish.
    • Coloured polypropylene overlock binding.
    • Knitted wrist for enhanced grip.
    • Flexible m-KARPALS protect patch back.

    Design :

    • Sandy finish ensures better grip and oil and water resistance property.
    • Black coloured nitrile coated on palm and finger.
    • Segregated impact plate and m-KARPALS protect for easy finger and palm flexing and higher protection.
    • Velcro closure to adjust different sizes.

    Product Make :

    Size:

    Industry / Job : Iron & Steel, Construction & Civil, Heavy Engineering, Material Handling, Mining & Metallurgy, Forestry & Horticulture, Agriculture, Defence & Security, Paper, Oil, Gas & Petrochemical, Chemical & Paint

    Hazard / Risk : Dust, Puncture, Abrasion, Dirt, Heat, Vibration

    How To Use

    • Never leave to dry close to or on top of a heat source.
    • Not advised to use beyond 6 months of usage and stored in a cool, dry place.
    • Not advised to be used for more than 6 hours at a stretch.
    • Can be used to handle oil and non-hazardous chemicals.
    • Not advisable for the risk associated with moving machine parts.
    • Advised to wash with dry clothes.

    Tests Conducted

    • Abrasion as per EN 388 is 4: Resistance to abrasion Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
    • Cut as per EN 388 is 1: Blade cut resistance Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
    • Tear as per EN 388 is 1: Tear resistances Based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
    • Puncture as per EN 388 is 1: Puncture resistances Based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
    • TDM blade cut resistant as per EN 388 is X (X means not tested): TDM blade cut resistant The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.

    Remarks

    • Nitrile provides usefulness in an oily and slippery environment.
    • These gloves can be used effectively to resist chemical and abrasion hazard.
    • This glove can be used during bike driving.

    Products Used in Same Industry