Menu

    Mallcom - P85NAG

    • By Industry

    • By Hazard

    • By Protection

    Please rotate your device

    We don't support landscape mode yet. Please go back to portrait mode for the best experience.

    scroll up icon

    Hover to zoom

    Grey Polyester 15 gauge seamless liner coated with blue coloured Nitrile compound, Sandy finish. Polyester seamless with Nitrile coating ensures protection against chemical as well as mechanical threats

    Key Features

    • Seamless knitting construction
    • Open back configuration for better ventilation
    • Ergonomically correct design conforms snugly to the natural shape of the hand, increasing comfort and reducing hand fatigue
    • Color coded overlock binding helps to identify different sizes 07 Red, 08 Yellow, 09 Brown, 10 Black)
    • Nitrile dipped palm provides excellent puncture and abrasion resistance properties, also provide assistance to handling chemicals and oils

    Design :

    • Colour coded overlock binding helps to identify different sizes 07 Red, 08 Yellow, 09 Brown, 10 Black)

    Product Make :

    Industry / Job : Construction & Civil, Heavy Engineering, Material Handling, Agriculture, Manufacturing, Repairs & Maintenance

    Hazard / Risk : Abrasion, Low Visibility, Slip

    How To Use

    • Never leave to dry close to or on top of a heat source.
    • Not advised to use beyond 6 months of usage and stored in a cool, dry place.
    • Not advised to be used for more than 6 hours at a stretch.
    • Can be used to handle oil and non-hazardous chemicals.
    • Not advisable for the risk associated with moving machine parts - Advised to wash in cold water with mild detergent and can be tumble dried at low or no heat.

    Tests Conducted

    • Abrasion as per EN 388 is 4: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
    • Cut as per EN 388 is 1: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
    • Tear as per EN 388 is 2: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
    • Puncture as per EN 388 is 1: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
    • TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance travelled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.

    Remarks

    • Nitrile provides usefulness in an oily and slippery environment.
    • Absorbs oil from an oily environment to restrict slippage chances.

    Products Used in Same Industry

    P85NAG Seamless Knitted Gloves