Menu

    Mallcom - NF153G

    • By Industry

    • By Hazard

    • By Protection

    Please rotate your device

    We don't support landscape mode yet. Please go back to portrait mode for the best experience.

    scroll up icon

    Hover to zoom

    Unsupported flock lined nitrile dipped gloves.

    Key Features

    • Cotton flocklined unsupported nitrile gloves, offers added comfort and better absorption of perspiration.
    • Raised diamond pattern grip.
    • Specially designed contour shape ensures better dexterity.
    • Patterned palm and fingers give excellent grip in both wet and dry condition.
    • Good protection from hydraulic fluids, organic acids and alkalies, at palm area when compared to ordinary gloves.

    Design :

    • Gauntlet style.
    • Unsupported green coloured nitrile gloves.
    • Length: 13 inch, Thickness: 15 mil
    • Good protection from hydraulic fluids, gasoline alcohols, organic acids and alkalis, at palm area when compared with ordinary gloves.

    Product Make :

    Size:

    Industry / Job : Pharmaceutical, Chemical & Paint, Biotechnology, Hospitality & Housekeeping, Material Handling, Oil, Gas & Petrochemical, Consumer Goods (FMCG)

    Hazard / Risk : Chemical Splash, Biohazard, Oil, Puncture

    How To Use

    • Store in a cool, dry place, away from frost and light ion their original packaging.
    • No specific cleaning or maintenance is required for this type of gloves.

    Tests Conducted

    • Abrasion as per EN 388 is 4: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
    • Cut as per EN 388 is 1: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
    • Tear as per EN 388 is 0: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
    • Puncture as per EN 388 is 1: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
    • TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.

    Products Used in Same Industry