Menu

    Mallcom - L210B

    • By Industry

    • By Hazard

    • By Protection

    Please rotate your device

    We don't support landscape mode yet. Please go back to portrait mode for the best experience.

    scroll up icon

    Hover to zoom

    10 gauge yellow polyester seamless glove with blue latex palm coating.

    Key Features

    • This glove series provides durable hand protection and supreme abrasion resistance.
    • It has outstanding dexterity.
    • 10 gauge gloves are made with polyester yarn and a latex coated palm.
    • Finger tips offer increased grip, chemical & mechanical resistance.

    Design :

    • It has wrinkle palm finish.

    Size:

    Industry / Job : Electronics & IT, Construction & Civil, Food & Beverage, Iron & Steel, Glass & Ceramic, Pharmaceutical

    Hazard / Risk : Dust, Abrasion, Cut, Scratch

    How To Use

    • Never leave to dry close to or on top of a heat source.
    • Not advised to be used for more than 8hours at a stretch.
    • For washing use lukewarm water at about 40 C with regular detergent and can be tumble dried at medium heat.
    • Store in a cool, dry place, away from frost, packed in their original packages.
    • Not advised to deal with moving parts of machine wearing these gloves.

    Tests Conducted

    • Abrasion as per EN 388 is 4: Resistance to abrasion Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
    • Cut as per EN 388 is 5: Blade cut resistance Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5
    • Tear as per EN 388 is 4: Tear resistances Based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
    • Puncture as per EN 388 is X: Puncture resistances Based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
    • TDM blade cut resistant as per EN 388 is X (X means not tested): TDM blade cut resistant The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance travelled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.

    Remarks

    • 100% polyester provides usefulness in an oily and chemical environment.
    • This glove can be used effectively to resist chemical, abrasion and dirt.
    • Extremely lightweight gloves along with binding ensure comfort.

    Products Used in Same Industry