Mallcom - JD7AY

    • By Industry

    • By Hazard

    • By Protection

    Please rotate your device

    We don't support landscape mode yet. Please go back to portrait mode for the best experience.

    scroll up icon

    Hover to zoom

    Light weight 60 GSM outside Seam sealed Disposable coverall for infectious disease control and contamination prevention

    Disposable Seam sealed coverall made of SSMMS fabric , it can be used to protect from bio hazard risk, and harmful particles, the micro porous fabric material allows air and moisture to escape from within the suit, while helping to protect from the hazard on the outside.

    Key Features

    • Made of 60 GSM breathable SSMMS fabric
    • zip closure system
    • Elastic loops are stitched with the cuff to insert finger when needed
    • The garment is stitched with outside seam and is not turned around to avoid any contamination in inner side of the garment.
    • Heat seal seamed tape

    Design :

    • Ergonomic
    • Elastic cuffs, waist and ankles for a better fit and freedom of movement

    Product Make :

    Industry / Job : Biotechnology, Healthcare, Pharmaceutical

    Hazard / Risk : Biohazard, Air Contamination, Chemical Splash

    How To Use


    Coveralls designed for protection against hazardous substances and contamination of both product and personnel. They are typically used for protection against dry particles and low hazardous splashes and sprays. The determination for suitability of coverall is the final responsibility of the user. The suit may be contaminated on removal, and should be removed so as to avoid contamination of the user.


    The user shall be the sole judge of the suitability for the type of protection required and the correct combinations of coveralls accessories and ancillary equipment. Up on contamination, wear or damage, the coverall should be removed and appropriately disposed of at the earliest opportunity. The wearer should always ensure to check the integrity of the coverall before wearing it. The possibility of heat stress should be considered in very warm conditions. Heat stress can be reduced or eliminated by the appropriate use of undergarments and ventilation equipment. Extreme of heat and cold may adversely affect the performance of this garment. The coverall should not be used where there is a risk to certain hazardous chemicals that have not been tested against.. The user must also wear compatible chemical resistant gloves, boots and respiratory protection. The gloves should cover the elastic cuffs.
    • Do not use for Contact with heavy oils, sparks or flames, or combustible liquids
    • Exposure situations resulting in spray or liquid build up on the suit
    • Environments with high mechanical risks (abrasions, tear, cut)
    • Environments with conditions of excessive heat
    • Product must never be altered or modified

    Storage and disposal
    • Store in dry, clean conditions in original packaging, Store away from direct sunlight,
    • Sources of high temperature, and solvent vapours
    • Store within the temperature range -20°C to +25°C (-4°F to +68°F) and with relative humidity below 80%
    • Shelf life is three years from date of manufacture when stored as stated above
    • Replace garments if damaged, heavily contaminated or in accordance with local work practice
    • Handle and dispose of contaminated garments with care and in accordance with national regulations

    Wash care instruction
    • Limited use
    • Do not wash
    • Do not bleach
    • Do not Iron
    • Do not tumble dry
    • Do not dry clean

    Tests Conducted

    This product complies with the PPE REGULATION 2016/425,CAT III with TYPE 4/4B TYPE 5/5B TYPE 6/6B notably regarding ergonomics, innocuousness, comfort, ventilation and flexibility, with Standards EN 13034:2005 + A1:2009 (Protection against liquid chemicals) , EN 14605:2005+A1:2009 (Protective clothing against liquid chemicals) , EN ISO 13982-1:2004+A1:2010 (Protective clothing for use against solid particulates) EN 14325:2004 (Protective clothing against chemicals) EN ISO 13688:2013 (General requirements for safety garments)

    EC Type Testing done by SGS India Pvt. Ltd. 28 B/1 (SP), 28 B/2 (SP), Second Main Road, Ambattur Industrial Estate, Chennai – 600058. India.

    JD7AY Disposable Wear