Hover to zoom
Driver gloves with grain leather palm and split leather back.
Key Features
- Grain leather at palm and split leather at back.
- Knitted elastic cuff for better fitting.
- Elastic cuff restricts various hazardous material to go inside the palm.
- Wing thumb.
- Good abrasion, tear and puncture resistivity.
Design :
- American assembly.
- Winged thumb.
- Red binding at cuff.
Product Make :
| Material | Grain leather |
| Cuff | Elasticated cuff |
| Lining | Unlined |
Size:
| Universal | 6 | 7 | 8 | 9 | 10 | 11 |
Industry / Job : Manufacturing, Material Handling, Construction & Civil, Logistics & Transportation, Repairs & Maintenance, Agriculture, Forestry & Horticulture, Warehousing & Assembling
Hazard / Risk : Abrasion, Puncture, Friction, Dirt, Vibration, Heat
Tests Conducted
- Abrasion as per EN 388 is 2: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
- Cut as per EN 388 is 1: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
- Tear as per EN 388 is 2: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
- Puncture as per EN 388 is 2: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
- TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.
