Skip to product information
1 of 8

C853


Canadian Gloves

 

  • Reinforced split leather canadian glove
  • Blue cotton drill back and cotton lining
  • Rubberised cuff and reinforcement over palm & index

Knuckle Protection

Abrasion

Grip

Cuff

Dry Environment

Select Size

C853

C853

Size Chart

How to Measure

C853

C853

C853

C853
Bulk Orders

For Bulk Orders, Fill out the enquiry form and someone from our team will get back to you as soon as possible.

EN388:2016+A1:2018

Delivery & Services

Easy Return

with our 15 days return poicy

Regular price Rs. 0.00
Sale price Rs. 0.00 Regular price

Pop-up link text View full details
  • Product Features
  • Product Details
  • Tests
  • Reviews

ABOUT THE DESIGN

USEFUL IN THESE INDUSTRIES

AUTOMOBILE

CONSTRUCTION

MATERIAL HANDLING

REPAIR & MAINTANENCE

  • Key Features: • Split leather gloves with extra reinforcement on palm, thumb and index. • Cotton canvas lining. • Drill back with leather reinforcement. • Canvas cuff/rubberized cuff.
  • Design: • Canadian assemble. • Reinforcement on palm, thumb and index. • Elasticated wrist. • Canvas cuff.
  • Remarks: • This glove does not contain substance known as being carcinogenic, neither toxic nor likely to cause allergies to sensitive people. • It is generally recommended that leather gloves be dry cleaned. Soap and water remove the natural oils present in the leather, causing them to stiffen and become brittle. • The leather used in the manufacture of this glove has chrome and PH within permissible limits. • Excellent abrasion, cut, tear and punture resistant. • Provides knuckle protection.
  • Test Conducted:
  • • Abrasion as per EN 388 is 4: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
  • • Cut as per EN 388 is 3: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
  • • Tear as per EN 388 is 4: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
  • • Puncture as per EN 388 is 4: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
  • • TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.
  • Product Features

    ABOUT THE DESIGN

    USEFUL IN THESE INDUSTRIES

    AUTOMOBILE

    CONSTRUCTION

    MATERIAL HANDLING

    REPAIR & MAINTANENCE

    Product Details

  • Key Features: • Split leather gloves with extra reinforcement on palm, thumb and index. • Cotton canvas lining. • Drill back with leather reinforcement. • Canvas cuff/rubberized cuff.
  • Design: • Canadian assemble. • Reinforcement on palm, thumb and index. • Elasticated wrist. • Canvas cuff.
  • Remarks: • This glove does not contain substance known as being carcinogenic, neither toxic nor likely to cause allergies to sensitive people. • It is generally recommended that leather gloves be dry cleaned. Soap and water remove the natural oils present in the leather, causing them to stiffen and become brittle. • The leather used in the manufacture of this glove has chrome and PH within permissible limits. • Excellent abrasion, cut, tear and punture resistant. • Provides knuckle protection.
  • Tests

  • Test Conducted:
  • • Abrasion as per EN 388 is 4: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
  • • Cut as per EN 388 is 3: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
  • • Tear as per EN 388 is 4: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
  • • Puncture as per EN 388 is 4: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
  • • TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.
  • Reviews

    People also Look For

    People also bought together